MIXING INFORMATION:
Synthesis Receiver Base™ Part A and B must be mechanically mixed for 5 minutes,
making sure that the mixture temperature stays below 95ºF (35ºC) during the mixing
process. After mixing, the combined parts must sit for a minimum of 15 minutes before
use.
Once mixed, the ink should be covered in the container when not in use. Mixed ink
has a working life of 5 days, if stored properly in a closed container. Storage areas
should be kept at no higher than 80ºF (27ºC).
Mixing ratio of Part A to Part B is as follows: 89 grams of Part A to 11 grams of Part B. Mix
only the amount needed for the print run. Remember to mechanically mix the two parts
together and let the mixed ink sit for at least 15 minutes before use.